Logo_150px_horizontal_blanco
blanco isoptipo

BCN3D / AURORA

Industrial FFF 3D printing with AI parametric design

Design your next part with Aurora

Bring AI 3D modelling, smart slicing, and 2D-to-3D AI design into your manufacturing workflow. Aurora combines these design tools with BCN3D’s IDEX printing technology and an actively heated chamber.

Request Aurora information
Captura de pantalla 2026-11-05 a las 12.16.39

Specify the part. Prepare the print.

AI parametric design

Prompt your geometry and design changes using Aurora’s AI 3D modelling tools. Or use 2D-to-3D AI design to develop your next part, then prepare the job with smart slicing.

Four High Speed IDEX print modes

Choose single, duplication, mirror, or dual mode to match your job. Aurora’s independent dual extrusion architecture builds on more than 10 years of BCN3D development.

Controlled filament conditions

Manage your filament with material recovery at 70 °C and humidity below 10% RH. Automatic switching, filament pre-loading, and active spool control support your printing workflow.

Industrial printing specifications

  • Build volume: 450 × 300 × 450 mm
  • Actively heated chamber: up to 70 °C
  • Heated bed: up to 120 °C
  • Print speed: up to 400 mm/s
  • Direct-drive Bondtech™ LGX Pro extrusion
  • Machine-vision tool alignment and AI-powered assisted calibration
  • HEPA and carbon filtration, emergency stop, safety pause, and UPS

See Aurora’s AI design workflow

Watch the Aurora introduction to see how spoken instructions describe changes to a prototype’s dimensions, mounting points, and ventilation.

Your Aurora questions answered

How do I connect Aurora to my workflow?

You can print offline using USB or connect through Wi-Fi or Ethernet. Aurora is compatible with BCN3D Cloud 2.0 and uses the free BCN3D Stratos slicer. A built-in camera and a 7-inch capacitive touchscreen give you additional ways to work with the printer.

Which filaments can I use?

You can use BCN3D filaments, the Open Filament Network, and third-party filaments with a free license. Aurora accepts 1.75 ± 0.05 mm filament. Its material operations system provides recovery at 70 °C and humidity below 10% RH, alongside automatic switching and active spool control.

What can I print with the IDEX system?

You can choose single, duplication, mirror, or dual printing modes for your parts. Aurora provides a 450 × 300 × 450 mm build volume, a bed heated up to 120 °C, and an actively heated chamber up to 70 °C for your manufacturing applications.

Discuss Aurora for your manufacturing workflow

Ask BCN3D about Aurora’s design tools, printing capabilities, and suitability for your parts. Share your contact details to request product information.

Request Aurora information

BCN3D · Aurora

Industrial FFF 3D printing with AI parametric design.

© BCN3D Technologies

POL. ACTIVA PARK, Carrer Tèrmens, 3, 25191 Lleida

Visit BCN3D